fbpx
Reg. Price $USD 24.00

Golden Motor Pedelec. Please note this item does not perform as expected. A real pedelec will sence the pressure on your pedals and adjust the throttle to increase the harder you push and decrease if you push less. The GM pedelec only sences if you are pedaling. If you pedel it goes full throttle, if [...]

Cycle Analyst Parts and Accessories

PAS_24P

Reg. Price $USD 24.00

Mini 24 Pole PAS sensor for bikes with square taper cranks. This integrated sensor is fully contained and more compact than a conventional exposed magnet ring device, and the 24 PAS poles allows for almost instant power engagement the moment you start pedaling. Internal electronics have been customized to be compatible with the CA3’s PAS [...]

Reg. Price $USD 24.00

CA3 Compatible Quadrature PAS Sensor, with Split 12 Magnet Ring for Square Taper Spindle Mount

All Products

Sempu 128mm

Reg. Price $USD 108.00

Sempu T2.3 torque sensing bottom bracket with 127.5mm Spindle Length. Fits bicycles with standard 68mm threaded bottom bracket and includes extension cable compatible with V3 Cycle Analyst. Total cable length from bottom bracket to CA connector is 91cm. This sensor has a resting torque voltage of 1.5V that increases to 4.0V with force on the [...]

Reg. Price $USD 145.00

TDCM Torque Sensing Bottom Bracket, CA3 Compatible. 114mm Spindle The TDCM bottom bracket has 12 pole cadence sensor as well as a 2.5-3.3V voltage output that is proportional to the chain tension on the crank, and works great when you are after a responsive pedalec mode without concern of the exact human watts. USER GUIDE [...]

Reg. Price $USD 145.00

TDCM Torque Sensing Bottom Bracket, CA3 Compatible. 114mm Spindle The TDCM bottom bracket has 12 pole cadence sensor as well as a 2.5-3.3V voltage output that is proportional to the chain tension on the crank, and works great when you are after a responsive pedalec mode without concern of the exact human watts. USER GUIDE [...]

Reg. Price $USD 145.00

TDCM Torque Sensing Bottom Bracket, CA3 Compatible. 114mm Spindle The TDCM bottom bracket has 12 pole cadence sensor as well as a 2.5-3.3V voltage output that is proportional to the chain tension on the crank, and works great when you are after a responsive pedalec mode without concern of the exact human watts. USER GUIDE [...]